KG4LNE | Phoenix

GE Phoenix Resources

This area contains general manuals, schematics and documentation for the GE Phoenix SX and PSX radios. The parallel port programming hardware and the EPROM data structure information is based on the original work of Gary Marsh VO1CPU. Gary and others did the original pioneering background work here. I have built upon the work of Gary and others to create the GE-Flash and PSX200 programming applications for Windows. You can visit Gary's website for additional Phoenix info.

Special thanks to Mike Swiderski K4HBI who gave me my first GE Phoenix PSX-200 radio and turned me on to these great radios. Also, thanks to Gary Benjamin and Doug Bennett for their help testing and debugging the PSX200 software and hardware. Gary and Doug provided valuable assistance with the scopes, logic analyzers and hardware debugging during the initial testing phase of the PSX200 project. Also, special thanks to Larry Waggoner WOKA who helped tremendously with the software debugging, programming details and testing on the various Phoenix models.

Phoenix SX UHF

GE Phoenix Manuals and Documentation

Here are various schematics and service manuals for the Phoenix radios. If you have any additional information or documentation to contribute please let us know!

LBI-31213E	Phoenix SX VHF wideband service section and maintenance manual.
LBI-31230F	Phoenix SX VHF wideband maintenance manual.
LBI-31588B	Phoenix SX VHF wideband maintenance manual.
LBI-31393B	Phoenix SX 128 channel mode expander option board schematic.
LBI-31587C	PSX-200 CPU, synthesizer and interconnect board schematics.
LBI-31307	Priority scan features and usage for the SX 16 channel scanning radios.
LBI-31266B	Programming instructions for the S and SX radios using the 4EX22A10 programmer.
LBI-31266E	Programming Instructions for the SX 16 channel non-scanning radios.
LBI-31360B	Programming instructions for the SX 16 channel scanning radios.
LBI-31189B	Instructions for using the 4EX22A10 hand programmer.

Data Sheets and other Phoenix Documentation

PSXDataFormat.pdf

Phoenix internal EEPROM data formats and internals.

X22C12.pdf

Data sheet for the original Xicor X2212 EEPROM.

X24C44.pdf

Data sheet for the original Xicor X24C44 EEPROM.

PhoenixModelnfo.xls
Excel Spreadsheet of Phoenix model information from Hall Electronics.

Microphone and Connector Wiring

Many Phoenix Radios used the CES 600L microphone with an optional touch tone pad. The CES microphones are still in production and have a number of internal configurable options available (mic & tone gain, etc). For complete option details view the 600L owners manual in PDF format.

CES 600L Microphone Wiring

Color Function To Radio P911

BLUE +12V DC INPUT +12V *

RED PTT (logic low) 2

WHITE TX AUDIO OUT 4

BLACK CTCSS HANG UP (logic low) N/C

SHIELD AUDIO/LOGIC GROUND 3

YELLOW LOGIC & POWER GROUND 3

* The BLUE +12V wire on the CES600 microphone should be connected to a switched +12V line inside the radio. On my radios I found the switched +12V power at point HL57 (one of the inter-board feed through pins located on the top board near the front panel). I then used one of the extra pins (pin 8) on P911 as my +12V power source. Note on the SX I had to cut a trace on the bottom side of the board in order to use Pin 8 as a microphone power pin; on the PSX-200 no trace ran to this pin and I just ran the wire from HL57 to Pin 8.

Phoenix Microphone Connector (P911)

P911 Description

1 GROUND (A-)

2 PTT - TX (Active LOW)

3 MIC SHIELD GROUND

4 MICROPHONE INPUT HI

5 MICROPHONE INPUT HI

6 RESET (Active LOW)

7 CHANNEL SELECT

8 (I converted this pin to +12V for mic power)

Phoenix Power Connector (P910)

P910 Description

1 TO IGNITION SWITCH + (2A Fused)

2 RX MUTE (Active LOW)

3 EXTERNAL SPEAKER HI

4 FILTERED VOL/SQ HI

5 SPARE (Channel A/B Select)

6 GROUND

7 EXTERNAL SPEAKER LOW

8 GROUND

9 CG DISABLE (Active LOW)

10 INTERNAL SPEAKER HI

11 +13.5 VDC POWER INPUT (15A Fused)